C3310 10mm OZ1833 Collet C3310 10mm OZ1833 Collet

The OZ type collets differ to the ER collets in that they are designed to accommodate an exact size of cutter shank. It is essential to use the correct type of collet to fit the spindle on your machine and the tool shank diameter. 

• Tooling Shank Size: 10mm
• Collet Type: OZ1833
• Length: 34mm
• Diameter: 19.7mm

Part Number: C3310

Collets should be replaced every 3 - 6 months. This will avoid problems associated with worn collets including:

• Poor cut quality
• Reduced tool life
• Premature tool breakage
• Tools working loose whilst cutting

The OZ type collets differ to the ER collets in that they are designed to accommodate an exact size of cutter shank. It is essential to use the correct type of collet to fit the spindle on your machine and the tool shank diameter. 

• Tooling Shank Size: 10mm
• Collet Type: OZ1833
• Length: 34mm
• Diameter: 19.7mm

Part Number: C3310

Collets should be replaced every 3 - 6 months. This will avoid problems associated with worn collets including:

• Poor cut quality
• Reduced tool life
• Premature tool breakage
• Tools working loose whilst cutting