C3220 20-19, 20mm ER 32 Collet C3220 20-19, 20mm ER 32 Collet

£30.80
SKU: C3220
Cones & Collets
CNCShop
Description Description

These are suitable for use with several spindles including ELTE, HSD, Colombo and Perske. It is essential to use the correct type of collet to fit the spindle on your machine and the tool shank diameter. 

  • Tooling Shank Size: 20mm
  • Collet Type: ER32
  • Length: 40mm
  • Diameter: 33mm

Part Number: C3220

Collets should be replaced every 3 - 6 months. This will avoid problems associated with worn collets including:

  • Poor cut quality
  • Reduced tool life
  • Premature tool breakage
  • Tools working loose whilst cutting

These are suitable for use with several spindles including ELTE, HSD, Colombo and Perske. It is essential to use the correct type of collet to fit the spindle on your machine and the tool shank diameter. 

  • Tooling Shank Size: 20mm
  • Collet Type: ER32
  • Length: 40mm
  • Diameter: 33mm

Part Number: C3220

Collets should be replaced every 3 - 6 months. This will avoid problems associated with worn collets including:

  • Poor cut quality
  • Reduced tool life
  • Premature tool breakage
  • Tools working loose whilst cutting