AXYZ - 20064 Vexta PK299F4.5 Stepper Motor with Pulley AXYZ - 20064 Vexta PK299F4.5 Stepper Motor with Pulley

The Vexta PK299F4.5 Stepper motor includes a 24 tooth pulley and terminated cables. Double stack motor with a holding torque exceeding 600 once-inches (4.3 N-m).

This motor is the most commonly used stepper motor for X and Y axis in all AXYZ stepper system router tables. For Z use either 26885 or 25352.

Note: These motors are extremely reliable and motor failure is very rare. Before replacing this motor check the following more likely problems:

* Loose and slipping pulley on the motor shaft
* Burnt wires on either motor connectors or on the step drive connectors in the control box
* Blown stepper drive fuses
* Stepper drive failure

The Vexta PK299F4.5 Stepper motor includes a 24 tooth pulley and terminated cables. Double stack motor with a holding torque exceeding 600 once-inches (4.3 N-m).

This motor is the most commonly used stepper motor for X and Y axis in all AXYZ stepper system router tables. For Z use either 26885 or 25352.

Note: These motors are extremely reliable and motor failure is very rare. Before replacing this motor check the following more likely problems:

* Loose and slipping pulley on the motor shaft
* Burnt wires on either motor connectors or on the step drive connectors in the control box
* Blown stepper drive fuses
* Stepper drive failure