6000338: A-NDC 96 Stepper Drive with Harness 6000338: A-NDC 96 Stepper Drive with Harness

New series of bipolar micro step stepping motor drives, specifically developed for applications sensitive to acoustic noise and vibration.
Significant evolution of the NDC series, preserving backward mechanical, electrical and applicative compatibility.
Target: advanced applications requiring high precision, smoothness of movement and low acoustic noise.

PLEASE CLICK HERE TO VIEW THE CONFIGURATION GUIDE FOR PART NUMBER 3009214: A-NDC 96 STEPPER DRIVE

HIGHLIGHTS

• Full digital microstepping drive.
• Adaptive microstepping up to 12.800 step/rev (1/64).
• Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.

TECHNICAL SPECIFICATIONS

• Version: drive housed in a metallic box in 110 x 108 x 34 mm, equipped with plug-in connectors.
• Range of operating voltages: 24-85 VDC.
• Range of current: 1.9 -6 Amps. Setting up to eight possible values by means of a dip-switch.
• Microstepping: 400, 800, 1.600, 3.200, 6.400 and 12.800 steps/revolution. Setting by means of a dip- switch.
• Management of the current profile setting by means of a dip-switch.
• Automatic current reduction at motor standstill.

PROTECTIONS

• Protection against under-voltage and over-voltage.
• Protection against a short-circuit at motor outputs.
• Overtemperature protection with thermal sensor.
• Electronic damping facility for further acoustic noise and mechanic vibrations reduction.

THE A-NDC 96 STEPPER DRIVE REPLACES OBSOLETE ITEM, PART # 050855 PACSCI 6410 STEPPER DRIVE

If an X-axis drive is being replaced, both X1 and X2 drives will need to be replaced. 

If replacing stepper drive in the ATC the below is required: 

1 x Part # 6000338: A-NDC 96 Stepper Drive

1 x Part # 1780551-00: Mounting Plate

New series of bipolar micro step stepping motor drives, specifically developed for applications sensitive to acoustic noise and vibration.
Significant evolution of the NDC series, preserving backward mechanical, electrical and applicative compatibility.
Target: advanced applications requiring high precision, smoothness of movement and low acoustic noise.

PLEASE CLICK HERE TO VIEW THE CONFIGURATION GUIDE FOR PART NUMBER 3009214: A-NDC 96 STEPPER DRIVE

HIGHLIGHTS

• Full digital microstepping drive.
• Adaptive microstepping up to 12.800 step/rev (1/64).
• Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.

TECHNICAL SPECIFICATIONS

• Version: drive housed in a metallic box in 110 x 108 x 34 mm, equipped with plug-in connectors.
• Range of operating voltages: 24-85 VDC.
• Range of current: 1.9 -6 Amps. Setting up to eight possible values by means of a dip-switch.
• Microstepping: 400, 800, 1.600, 3.200, 6.400 and 12.800 steps/revolution. Setting by means of a dip- switch.
• Management of the current profile setting by means of a dip-switch.
• Automatic current reduction at motor standstill.

PROTECTIONS

• Protection against under-voltage and over-voltage.
• Protection against a short-circuit at motor outputs.
• Overtemperature protection with thermal sensor.
• Electronic damping facility for further acoustic noise and mechanic vibrations reduction.

THE A-NDC 96 STEPPER DRIVE REPLACES OBSOLETE ITEM, PART # 050855 PACSCI 6410 STEPPER DRIVE

If an X-axis drive is being replaced, both X1 and X2 drives will need to be replaced. 

If replacing stepper drive in the ATC the below is required: 

1 x Part # 6000338: A-NDC 96 Stepper Drive

1 x Part # 1780551-00: Mounting Plate