C2003 3-2, 3mm ER 20 Collet C2003 3-2, 3mm ER 20 Collet
£15.18
These are suitable for use with several spindles including ELTE, HSD, Colombo and Perske. It is essential to use the correct type of collet to fit the spindle on your machine and the tool shank diameter.
- Tooling Shank Size: 3mm
- Collet Type: ER20
- Length: 31.5mm
- Diameter: 21mm
Part Number: C2003
Collets should be replaced every 3 - 6 months. This will avoid problems associated with worn collets including:
- Poor cut quality
- Reduced tool life
- Premature tool breakage
- Tools working loose whilst cutting
These are suitable for use with several spindles including ELTE, HSD, Colombo and Perske. It is essential to use the correct type of collet to fit the spindle on your machine and the tool shank diameter.
- Tooling Shank Size: 3mm
- Collet Type: ER20
- Length: 31.5mm
- Diameter: 21mm
Part Number: C2003
Collets should be replaced every 3 - 6 months. This will avoid problems associated with worn collets including:
- Poor cut quality
- Reduced tool life
- Premature tool breakage
- Tools working loose whilst cutting